#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/usr/local/apps/apache2"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile "logs/httpd.pid"

#
# Timeout: The number of seconds before receives and sends time out.
#
#Timeout 120

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off

#
# Don't give away too much information about all the subcomponents
# we are running.  Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens ProductOnly

# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80


#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#

#Libxml required to be loaded for mod_proxy_html
LoadFile /usr/local/apps/lib/libxml2.so.2

Include etc/conf.d/modules.cnf
SetEnv TMP "/usr/local/apps/apache2/tmp"

<IfModule !mpm_netware_module>
	<IfModule !mpm_winnt_module>
		#
		#Include etc/conf.d/*.conf
		ExtendedStatus On
		# If you wish httpd to run as a different user or group, you must run
		# httpd as root initially and it will switch.  
		#
		# User/Group: The name (or #number) of the user/group to run httpd as.
		# It is usually good practice to create a dedicated user and group for
		# running httpd, as with most system services.
		#
		User nobody	
		Group nobody
	
	</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root@localhost

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
ServerName 127.0.0.1:80

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride All
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/apps/apache2/www/htdocs"
<Directory "/usr/local/apps/apache2/www/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted

</Directory>

Alias /error/ "/usr/local/apps/apache2/www/error/"

<IfModule mod_negotiation.c>
	<IfModule mod_include.c>
		<Directory "/usr/local/apps/apache2/www/error">
			AllowOverride None
			Options IncludesNoExec
			AddOutputFilter Includes html
			AddHandler type-map var
			Order allow,deny
			Allow from all
			LanguagePriority en es de fr
			ForceLanguagePriority Prefer Fallback
		</Directory>
	</IfModule>
</IfModule>

# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
ErrorDocument 500 /error/50x.html
ErrorDocument 404 /error/404.html

#DirectoryIndex noidex.html index.html index.html.var

#
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
	Require all denied
	Satisfy All
</Files>

# Required webuzo security policy: Disallow remote access to .htaccess, .htpasswd, .user.ini, and php.ini files
<FilesMatch "^(\.user\.ini|php\.ini)$">
	Require all denied
	Satisfy All
</FilesMatch>

TraceEnable Off

#
TypesConfig etc/mime.types
#DefaultType text/plain
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /usr/local/apps/apache2/logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#Softaculous AMPPS Will take max 600 sec to process anything
TimeOut 600

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
	LogFormat "%{Referer}i -> %U" referer
	LogFormat "%{User-agent}i" agent

    <IfModule logio_module>
		# You need to enable mod_logio.c to use %I and %O
		LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    # CustomLog "logs/access_log" common
	
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog /usr/local/apps/apache2/logs/access_log combined
</IfModule>

<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
	# ============================================================================
	# Fancy directory listings
	# Directives controlling the display of server-generated directory listings.
	
	# Required modules: mod_autoindex, mod_alias
	
	# To see the listing of a directory, the Options directive for the
	# directory must include "Indexes", and the directory must not contain
	# a file matching those listed in the DirectoryIndex directive.
	
	# IndexOptions: Controls the appearance of server-generated directory
	# listings.
	
	IndexOptions FancyIndexing HTMLTable VersionSort
	
	# We include the /icons/ alias for FancyIndexed directory listings.  If
	# you do not use FancyIndexing, you may comment this out.
	
	Alias /icons/ "/usr/local/apps/apache2/www/icons/"
	
	<Directory "/usr/local/apps/apache2/www/icons">
		Options Indexes MultiViews
		AllowOverride None
		#Order allow,deny
		Require all granted
	</Directory>
	
	# AddIcon* directives tell the server which icon to show for different
	# files or filename extensions.  These are only displayed for
	# FancyIndexed directories.
	
	AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
	
	AddIconByType (TXT,/icons/text.gif) text/*
	AddIconByType (IMG,/icons/image2.gif) image/*
	AddIconByType (SND,/icons/sound2.gif) audio/*
	AddIconByType (VID,/icons/movie.gif) video/*
	
	AddIcon /icons/binary.gif .bin .exe
	AddIcon /icons/binhex.gif .hqx
	AddIcon /icons/tar.gif .tar
	AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
	AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
	AddIcon /icons/a.gif .ps .ai .eps
	AddIcon /icons/layout.gif .html .shtml .htm .pdf
	AddIcon /icons/text.gif .txt
	AddIcon /icons/c.gif .c
	AddIcon /icons/p.gif .pl .py
	AddIcon /icons/f.gif .for
	AddIcon /icons/dvi.gif .dvi
	AddIcon /icons/uuencoded.gif .uu
	AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
	AddIcon /icons/tex.gif .tex
	AddIcon /icons/bomb.gif core
	
	AddIcon /icons/back.gif ..
	AddIcon /icons/hand.right.gif README
	AddIcon /icons/folder.gif ^^DIRECTORY^^
	AddIcon /icons/blank.gif ^^BLANKICON^^
	
	# DefaultIcon is which icon to show for files which do not have an icon
	# explicitly set.
	
	DefaultIcon /icons/unknown.gif
	
	# AddDescription allows you to place a short description after a file in
	# server-generated indexes.  These are only displayed for FancyIndexed
	# directories.
	# Format: AddDescription "description" filename
	
	AddDescription "GZIP compressed document" .gz
	AddDescription "tar archive" .tar
	AddDescription "GZIP compressed tar archive" .tgz
	AddDescription "ZIP archive" .zip
	AddDescription "CAB archive" .cab
	AddDescription "Win32 Executable" .exe
	
	# ReadmeName is the name of the README file the server will look for by
	# default, and append to directory listings.
	
	# HeaderName is the name of a file which should be prepended to
	# directory indexes. 
	ReadmeName README.html
	HeaderName HEADER.html
	
	# IndexIgnore is a set of filenames which directory indexing should ignore
	# and not include in the listing.  Shell-style wildcarding is permitted.
	#
	IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
	# ============================================================================    
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
</IfModule>

ScriptAlias /cgi-bin/ /usr/local/apps/apache2/www/cgi-bin/
<Directory "/usr/local/apps/apache2/www/cgi-bin">
    AllowOverride None
    Options None
	Require all granted
</Directory>

<IfModule cgid_module>    
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    
    #Scriptsock logs/cgisock
</IfModule>

<IfModule mime_module>    
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    
    TypesConfig etc/mime.types
    
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    AddType application/x-httpd-php .php
	AddType application/x-tar .tgz
	AddType image/x-icon .ico
	AddType application/vnd.wap.wmlc .wmlc
	AddType application/x-httpd-php .phtml .pwml .php5 .php4 .php3 .php2 .php
	AddType text/vnd.wap.wml .wml
	AddType text/vnd.wap.wmlscript .wmls
	AddType text/vnd.wap.wmlscriptc .wmlsc
	AddType image/vnd.wap.wbmp .wbmp
	
	# Handler for Perl
	AddHandler cgi-script .cgi .pl .plx .ppl .perl
	
	# AddHandler allows you to map certain file extensions to "handlers":
	# actions unrelated to filetype. These can be either built into the server
	# or added with the Action directive (see below)
	#
	# To use CGI scripts outside of ScriptAliased directories:
	# (You will also need to add "ExecCGI" to the "Options" directive.)
	
    # For type maps (negotiated resources):
    AddHandler type-map var

    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html

# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.

#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

Include etc/conf.d/*.conf

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
<Location /Webuzo-server-status>
    SetHandler server-status	
    Order deny,allow
    Deny from all
    Allow from 127.0.0.1 ::1 localhost
</Location>

# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.

<Location /webuzo-server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from 127.0.0.1 ::1 localhost
</Location>

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.

<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

#
# REQUEST TIME OUT module configuration section.
# 
<IfModule mod_reqtimeout.c>
  RequestReadTimeout header=20-40,MinRate=500 body=20,MinRate=500
</IfModule>

#The below line displays Apache web server signature(i.e Apache version number with OS on which it is running).
#User can change the value as: On | Off | Email (Default value is On)
ServerSignature Off